Simson S51, S53, SR50 half-engine with 4th speed gearbox - MZA - Silver
Content
The best solution for variability of construction, or GO engine. Assembled from MZA parts and assembled by their mechanics.
The engine blocks have a cylinder bore with a liner diameter of D46.1 mm.
The radius is folded, the crankshaft and gearbox are mounted and limited against movement, and oil seals are installed.
The engine consists of the following parts:
- 1x engine blocks S51, S53, S60, SR50 with starter mount
- 1x complete 4th speed gearbox (short) including gear shift linkage
- 1x crankshaft S51 MZA
- 1x set of bearings - MZA
- 3x Viton seals - MZA
- 1x gasket between blocks
DOES NOT INCLUDE any accessories, only what is in the photo.
The advantage of this semi-motor is that you choose how you want to finish it.
You can choose from a wide range of cylinders offered, from standard with a bore of 38.00 mm to 41.00 mm or one of the tuned, modified cylinders, the same for the cylinder head (these parts are not included)
Also includes primary gear, clutch according to load, cover with or without tachometer, sprocket, ignition cover with gear, ignition, carburetor, etc. (these parts are not included)
This half-motor is most often used as the basis for a GO motor, the other necessary parts can be used from your original motor.
Distributor: MZA Meyer-Zweiradtechnik GmbH, Zeppelinstr. 1, 98617 Meiningen, Germany
