Carburetor cleaner LOCTITE - 400ml PROFI

Carburetor cleaner LOCTITE SF 7023

High quality and powerful solvent based cleaner. Quickly dissolves deposits of resin, oil and varnish. LOCTITE SF 7023 is intended for cleaning air intake systems, carburettor parts, valves, actuators, EGR valves, injectors, idle speed regulators, throttles, air flow meters and plastic parts. The product evaporates completely and leaves no residue.

Instructions for use:

1. Shake the package well before use.
2. Spray the product on the outside of the carburetor and wipe with a clean, dry cloth.
3. Start the engine and let it run for a few minutes until it warms up.
4. Turn off the engine, remove the air filter from the carburetor and spray the product into the intake port for about 10 seconds.
5. Wait 3 minutes for the product to take effect.
6. Restart the engine and apply the product to the intake port for another 30 seconds.
7. Let the engine run, increasing the revs occasionally until the engine runs smoothly.

NOTE: If the product accidentally gets on the car's paintwork, remove it immediately. The product may stain wax or paint.

Storage:

Unless otherwise stated on the label, the ideal storage method is in closed containers in a cool, dry place. Optimum storage temperature: 8 °C to 21 °C. Storage below 8°C or above 28°C can irreversibly change the properties of the product.

• Volume: 400 ml