Rubber bushing for engine and swingarm mounting block Simson S51

The rubber bushing of the engine mount and swingarm is the same. You need 2 pieces for the engine and 2 pieces for the swingarm. Silenblok must be pressed, but you can also do it in a vise. Slide the spacer into half of the silenblock (rubber sleeve) and slide the other half of the rubber sleeve without the spacer into the swingarm and then press everything together. Of course, it is necessary to lubricate everything sufficiently and not to forget patience. We recommend always ordering one extra piece, sometimes it is not possible to press the bushings on the first time and the rubber bushing breaks.

Designed for motorcycles:

• Simson S51 - Enduro, Electronic (50, 60, 70)

Dimensions and material:

• Outer diameter: 23.6 mm
• Inner diameter: 13.6 mm
• Width: 18.7 mm
• Silenblok: rubber (rubber)

All dimensions are within a tolerance of 2% due to manufacturing deviations. Price for 1 piece.